The Gemini does use a positive displacement pump. We are also using 3609. ______________________________ Reply Separator _________________________________ Subject: Re: Glue Author: Pat McGuine <[log in to unmask]> at Internet Date: 10/10/96 11:16 AM I'm not familiar w/ how Gemini brings the needle down to get a consistent z-height above the board. It has been my experience however that it is extraordinarily important that this is consistent. I have an older Camalot, we had to purchase a z-axis compensator for it from Camalot. Also, does the Gemini use a positive displacement pump? I have also found that this helped a lot. We just switched from Loctite 348 to Loctite 3609. 3609 is much better for us. At 09:24 10/10/96 CDT, Paul Stolar wrote: > I am using a Camalot Gemini and I wonder if anyone out there has > experimented with how to reduce variation. I would prefer that Camalot > and Loctite not respond to this, I would like to hear from people in > the field. If you prefer, write to me off line. I will compile the > inputs w/o names and repost. > > Thanks, > > Paul Stolar > [log in to unmask] > >*************************************************************************** >* TechNet mail list is provided as a service by IPC using SmartList v3.05 * >*************************************************************************** >* To unsubscribe from this list at any time, send a message to: * >* [log in to unmask] with <subject: unsubscribe> and no text. * >*************************************************************************** > > > -Pat- ------------- Patrick McGuine Nicolet Instrument [log in to unmask] (608) 276-6334 *************************************************************************** * TechNet mail list is provided as a service by IPC using SmartList v3.05 * *************************************************************************** * To unsubscribe from this list at any time, send a message to: * * [log in to unmask] with <subject: unsubscribe> and no text. * ***************************************************************************