======== Original Message ======== Sender: [log in to unmask] Received: from miso.wwa.com by arl-img-4.compuserve.com (8.6.10/5.950515) id OAA10285; Thu, 17 Aug 1995 14:07:32 -0400 Resent-Date: Thu, 17 Aug 1995 14:07:32 -0400 Received: from ipc by miso.wwa.com with uucp (Smail3.1.28.1 #8) id m0sj9LN-000Fb2C; Thu, 17 Aug 95 13:07 CDT Received: by ipchq.com (Smail3.1.28.1 #2) id m0sj8NQ-0000GuC; Thu, 17 Aug 95 12:05 CDT Old-Return-Path: <miso!bench.com!CHESTERL> Date: Thu, 17 Aug 1995 11:12:50 -0600 (CST) From: Chester Lao - Process Engineer <[log in to unmask]> Subject: Board House Referrals To: [log in to unmask] Message-id: <[log in to unmask]> Old-X-Envelope-to: ipchq.com!Technet X-VMS-To: [log in to unmask] MIME-version: 1.0 Content-type: TEXT/PLAIN; CHARSET=US-ASCII Content-transfer-encoding: 7BIT Resent-Message-ID: <"j5SKL3.0.o9C.3RtCm"@ipc> Resent-From: [log in to unmask] X-Mailing-List: <[log in to unmask]> archive/latest/896 X-Loop: [log in to unmask] Precedence: list Resent-Sender: [log in to unmask] Greetings, My company is presently looking for boardhouses that specialize or have experience in manufacturing PCB's with the following specs: High current capability back planes and power supplies. Heavy Cu, 2 and 4 oz., single and double side. Availibilty and capability of working with 0.093 mat., single and double sided. Ability to process from mylar film and tape artwork. I'm not an expert in PCB fabrication. I think that these are "older" technologies. However, we are looking for referrals for shops that can build these to our quality standards in a mixed volume. If anyone can make some suggestions, I would appreciate it. Chester Lao Process Engineer Benchmark Electronics, INC. ======== Fwd by: Stanley Kulak ======== FYI, Stan