Lou: What is Solder Float shock testing. ______________________________ Reply Separator _________________________________ Subject: Solder Float/Shock Testing Author: [log in to unmask] at ~INTERNET Date: 8/22/95 12:02 PM Received: by ccmail Received: from netcomsv by pragma.com (UUPC/extended 1.11) with UUCP; Tue, 22 Aug 1995 12:01:39 PDT Received: from miso.wwa.com by netcomsv.netcom.com with SMTP (8.6.12/SMI-4.1) id LAA00637; Tue, 22 Aug 1995 11:33:59 -0700 Resent-Date: Tue, 22 Aug 1995 11:33:59 -0700 Received: from ipc by miso.wwa.com with uucp (Smail3.1.28.1 #8) id m0skyB5-000FccC; Tue, 22 Aug 95 13:35 CDT Received: by ipchq.com (Smail3.1.28.1 #2) id m0skxHy-0000GeC; Tue, 22 Aug 95 12:39 CDT Old-Return-Path: <miso!aol.com!EnviEng> Date: Tue, 22 Aug 1995 13:33:55 -0400 From: [log in to unmask] X-ccAdmin: postmaster@netcomsv Message-ID: <[log in to unmask]> To: [log in to unmask] Subject: Solder Float/Shock Testing Resent-Message-ID: <"vZ6Dn1.0.GSI.rOXEm"@ipc> Resent-From: [log in to unmask] X-ccAdmin: postmaster@netcomsv X-Mailing-List: <[log in to unmask]> archive/latest/926 X-Loop: [log in to unmask] Precedence: list Resent-Sender: [log in to unmask] Hello all: We would like some information on temperature and time required prior to testing a sample in the solder pot for solder float/shock testing. We checked in the IPC Test Methods but could not find the specific information that we were looking for. Any help would be greatly appreciated! Sincerely, Lou Cerone, Process Engineer Benny George, Quality Control Tech