Kelly,
        
        From Enthones data sheet, the dielectric strength is listed as
        >500 VDC. This should be volts per mil. If you need additional 
        information, you can contact our Enthone technical rep (Greg Beck) 
        at 800-548-9801, ext/box 7213
        
        Hope this helps.
        
        John


______________________________ Reply Separator _________________________________
Subject: Enthone DSR 3241 Solder Mask
Author:  [log in to unmask] at corp
Date:    5/4/95 4:06 PM


From: Kelly Kovalovsky, Raw Card Quality Engineering                           
_     Phone:704-595-7336 Tie Line:795-7336 FAX Ext. 4727                       
Subject: Enthone DSR 3241 Solder Mask                                          
Can someone provide me with the dielectric strength of Enthone DSR             
3241 solder mask?                                                              
        
Kelly Kovalovsky                                                               
IBM Microelectronics Division                                                  
6800 IBM Drive MG12/251                                                        
Charlotte, NC  28262-8563