My suggestion is EFC-Wesco in Connecticut. Bob Fountain is their sales guy. They have done several custom film capacitors for us to be used in our high voltage power supplies running up to 180 kV. Granted the cap was not run at the full 180 kV, but 30 kV and 40 kV is not uncommon for us. My 2 cents. Phil -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Chris Knudsen Sent: Tuesday, December 04, 2018 11:02 AM To: [log in to unmask] Subject: [TN] (OT) High Voltage Pulse Caps Greetings TechNet community, We're having trouble with a custom cap supplier (first-time transaction), which can (not-necessarily) remain nameless. If I can tap into the collective TN hive-mind: Has anyone had a good experience with a cap manufacturer that can supply custom high energy caps with these type of specs: Qty (2) Pulse Capacitors 40 kV 12.5 uF for 20,000 (20 k) Joules Max (pulse) Similar application: https://en.wikipedia.org/wiki/Exploding_wire_method Very low duty cycle (1 or so shots per random day). Because of the above manufacturer issues, we are also interested in close, and not-so-close, temporary substitutes to perform some basic system functionality tests. I'm happy to receive responses off-line, or on TN if you feel others would benefit. Regards, Chris [log in to unmask] ------------------------------------------------------------------------