When I looked at their website I read this: "Workmanship in accordance with: •IPC-J-Std-001 •IPC-A-610 Level I, II & III and •IPC/WHMA-A-620" I noted that they don't reference the Space Addendums of either J-STD-001 or IPC/WHMA-A-620. Compliance with the space addendums is a requirement for NASA when using these two IPC standards. Rigo Garcia “The future belongs to those who believe in the beauty of their dreams” – Eleanor Roosevelt -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of John Anselmo Sent: Wednesday, September 28, 2016 6:22 PM To: [log in to unmask] Subject: Re: [TN] Wire Harness Build to Print suppliers with NASA approval http://www.skecorp.com/ Or look at this company. Regards, John -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Charlie Pitarys Sent: Wednesday, September 28, 2016 3:14 PM To: [log in to unmask] Subject: Re: [TN] Wire Harness Build to Print suppliers with NASA approval Tom, look at these guys. http://www.wildwoodelectronics.com/index.html Best Regards / Mit freundlichen Grüßen / Yang Benar / Saludos / Drishat shalom / Köszönettel / ขอบคุณครับ Charlie Pitarys (USA Retired) Technical Expert Sales Support Phone: (615) 983-4523 (preferred) Mobile: (615) 969-1919 Skype: charlie_pitarys www.KYZEN.com CONFIDENTIAL The content of this message, including any attachments, may contain privileged and/or confidential information proprietary to KYZEN and is intended only for the named addressees. If you are not the intended recipient, you may not disseminate, distribute or copy this email. Please notify the sender immediately by email if you have received this email in error and delete this email from your system. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Carroll, Thomas A Sent: Wednesday, September 28, 2016 2:31 PM To: [log in to unmask] Subject: [TN] Wire Harness Build to Print suppliers with NASA approval Can anyone tell me the names and locations of some good build to print wire harness shops that are experienced with building NASA approved wire harnesses? Any suggestions would be appreciated. Regards, Tom Thomas A. Carroll, CQA, FAA ODA Unit Member for BDS Supplier Quality Engineer Boeing Defense, Space and Security - East Region Supplier Quality eFAX: 314-777-1845 Virtual Desk Phone Number: 314-545-2358 email: [log in to unmask]<mailto:[log in to unmask]> P Go Green! Please do not print this e-mail unless necessary. NOTE: This communication may contain privileged or other confidential information. If you are not the intended recipient, or believe you have received this communication in error, please do not print, copy, retransmit, disseminate, or otherwise use the information. Also, please indicate to the sender that you have received this e-mail in error, and delete the copy you received. Thank you. EXPORT COMPLIANCE STATEMENT: "The information contained herein is or may be controlled by the International Traffic in Arms Regulations (ITAR), 22 CFR 120-130, and may not be exported, or disclosed to a foreign person, whether in the United States or abroad, without prior U.S. Government written approval"