reballing using laser can do the 5mil... https://www.youtube.com/watch?v=48VkRYhdcq4 > Bob, > > In addition to the advice you have had about auger valves, you may > consider going one step further. There are volumetric dosing pumps where > the "auger" or rotor is in an elastomeric stator rather than a metal tube. > The ensuing seal of rotor to stator can give much more control and > accuracy than a simple screw valve. > > I wrote about it: > http://www.slideshare.net/intertronics/wp12-1-endlesspistonpumptechnologyforprecisiondispensing > > Peter > > -------------------------------------------------------- > Peter Swanson > Managing Director > INTERTRONICS, Oxford, England > t 01865 842842 > m 07785 908556 > e [log in to unmask] > w www.intertronics.co.uk > > Read our news! http://www.intertronics.co.uk/blog/blog.htm > > INTERTRONICS is the trading name of Cygnet Electronics Ltd, > registered in England No 1835617. Registered office: > 17 Station Field Industrial Estate, KIDLINGTON, Oxfordshire, OX5 1JD, > ENGLAND > INTERTRONICS is certified to ISO 9001:2008 > -----Original Message----- > From: TechNet [mailto:[log in to unmask]] On Behalf Of Bob Wettermann > Sent: 23 March 2016 13:55 > To: [log in to unmask] > Subject: [TN] Auger Driven Dispensers > > Gents/Ladies: > > We are looking at putting a non-pneumatic drive dispenser on a robot. Due > to some pretty fine dots, the need for speed and for consistency and the > need for some lines to be dispensed, we are looking at an auger-driven > system (5-6 mil dots). > > Does anyone have favorite vendors of the dispensing pumps and controllers > that can be added on to a pieces of automation equipment? > > Regards > > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > For more information please contact helpdesk at x2960 or [log in to unmask] > ______________________________________________________________________ > -- > Bob Wettermann > BEST Inc > [log in to unmask] > Cell: 847-767-5745 > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > For more information please contact helpdesk at x2960 or [log in to unmask] > ______________________________________________________________________ > ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________