Thank you Ben, The problem is remove the component of the tape and reel we don't have the correct tray to specify component. Do you have a table to baking x time x thickness to Tape and Reel? Thank you _____________________________ Juliano Bettim Ribeiro DATACOM ENGENHARIA DE PROCESSOS Rua América Nº 1000 - Eldorado do Sul - RS CEP: 92990-000 +55 (51) 8446-2135 +55 (51) 3933-3000 Ramal: 3877 [log in to unmask] www.datacom.ind.br -----Mensagem original----- De: Gumpert, Ben [mailto:[log in to unmask]] Enviada em: sexta-feira, 30 de maio de 2014 08:33 Para: TechNet E-Mail Forum; Datacom - Juliano Ribeiro Assunto: RE: EXTERNAL: [TN] Baking in the Tape and Reel Juliano, The temperature you need is 40°C if you want to leave the parts in the tape and reel (this lower temperature prevents damage to the reel or to the cover tape) but this will take a long time. If you want to remove the parts from the tape then you can bake for a shorter period at a higher temperature, but then you have to deal with loose parts or find a tray to put the parts in. The time for the bake process depends on the size and thickness of the part. All of the information is in table 4-1 of the J-STD-033, but be sure to look at the bottom of the table, which talks to BGAs larger than 17 mm square. Ben -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Datacom - Juliano Ribeiro Sent: Friday, May 30, 2014 7:25 AM To: [log in to unmask] Subject: EXTERNAL: [TN] Baking in the Tape and Reel Dears, We need baking in the BGA, but the component is in Tape and Reel. What are time and temperature to the baking? Is there information in the JedeC-033/020? Thank you a lot _____________________________ Juliano Bettim Ribeiro DATACOM ENGENHARIA DE PROCESSOS Rua América Nº 1000 - Eldorado do Sul - RS CEP: 92990-000 +55 (51) 8446-2135 +55 (51) 3933-3000 Ramal: 3877 <mailto:[log in to unmask]> [log in to unmask] <http://www.datacom.ind.br/> www.datacom.ind.br ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________