Hi,zhao:
那要看具體的產品呀，如果是模組的話，是不用vcut進行切割呀，所以PCB板廠沒有進行vcut是沒有錯的，他們是根據gerber來製作的，只是你們客戶的RD沒有在連版圖上標註而已才會造成你目前的issue,謝謝！
寄件者: TGAsia [mailto:[log in to unmask]] 代理 Jison Shen(DD&TT)
寄件日期: 2014年3月27日 上午 11:06
收件者: [log in to unmask]
主旨: Re: [TGAsia] 回复: RE: [TGAsia]关于PCB板来料检验的IPC标准
Dear Zhao:
Firstly, I think you should check your Gerber file, whether there is V-cut in drawing.
PCB factory/supplier must be follow your Gerber file( or say drawing). If no have V-cut in drawing. Of course, PCB factory did not do the v-cut.
See below: it is our drawing, before proto build stage, provided to PCB factory.
Of course, below is initially drawing, so the V-cut angel defined 30~60 degree. ( Notes, not all pcb was defined so broadly v-cut angel at proto build stage, maybe there is so other cause, ex around component )
Before LPP/LMP stage, we defined a detail v-cut angel. (Notes: generally speaking, 30/45/60 degree is most universal)
[cid:[log in to unmask]]
Best Regards
From: TGAsia [mailto:[log in to unmask]] On Behalf Of pzhao
Sent: Wednesday, March 26, 2014 9:07 AM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: [TGAsia] 回复: RE: [TGAsia]关于PCB板来料检验的IPC标准
可是我们没有这样要求供应商，但是这个应该是行业默许的吧？PCB厂不开V-CUT显然是不合理的啊？
________________________________
Form：赵培
Call: 13803366446
Office 0311-82200512
----------------------------------
发件人： 黃志宏 處長 Leo<mailto:[log in to unmask]>
发送时间： 2014-03-26 08:49
收件人： pzhao<mailto:[log in to unmask]>; TGAsia<mailto:[log in to unmask]>
主题： RE: Re: [TGAsia]关于PCB板来料检验的IPC标准
Dear 趙工
這個在IPC-A-600中是不會有這個規定的.貴公司要求製作產品
是否有明確要PCB製作公司要作V-CUT.如果有這表示廠加漏流程
可以要求退貨返工.
如果沒有給廠家這樣明確的要求那會露作V-CUT就是很正常的.
畢竟每種產品每個客戶需求不一樣.如果不明確告知真的會錯
BR
Leo
From: pzhao [mailto:[log in to unmask]]
Sent: Wednesday, March 26, 2014 8:42 AM
To: 黃志宏 處長 Leo; TGAsia
Subject: 回复: Re: [TGAsia]关于PCB板来料检验的IPC标准
PCB厂家给我们提供的一批板，没有开V槽（工艺边和板子中间的V-CUT）
导致我们不能正常切割工艺边，这个在IPC-600H里面的那一条规定了？我找不到
谢谢各位
________________________________
Form：赵培
Call: 13803366446
Office 0311-82200512
----------------------------------
发件人： 黃志宏 處長 Leo<mailto:[log in to unmask]>
发送时间： 2014-03-25 17:13
收件人： [log in to unmask]<mailto:[log in to unmask]>
主题： Re: [TGAsia]关于PCB板来料检验的IPC标准
IPC-A-600
這是關於PCB的外觀驗收標準
From: TGAsia [mailto:[log in to unmask]] On Behalf Of pzhao
Sent: Tuesday, March 25, 2014 4:48 PM
To: [log in to unmask]<mailto:[log in to unmask]>
Subject: [TGAsia] 关于PCB板来料检验的IPC标准
大家好：
如题：关于PCB板来料检验的IPC标准号是那些呢？
谢谢
________________________________
Form：赵培
Call: 13803366446
Office 0311-82200512
----------------------------------
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
TGAsia是一个为业界同仁提供技术交流的平台。您可以在论坛上提出技术问题，交流行业经验，寻找供应商等。请勿发送任何招聘，广告信息。（注：对于寻求供应商的邮件，请勿回复[log in to unmask],请私下和发件人联系）。如您需要退出该邮件论坛，请直接发送邮件至 [log in to unmask]<mailto:[log in to unmask]> ,谢谢。
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
TGAsia是一个为业界同仁提供技术交流的平台。您可以在论坛上提出技术问题，交流行业经验，寻找供应商等。请勿发送任何招聘，广告信息。（注：对于寻求供应商的邮件，请勿回复[log in to unmask],请私下和发件人联系）。如您需要退出该邮件论坛，请直接发送邮件至 [log in to unmask]<mailto:[log in to unmask]> ,谢谢。
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
TGAsia是一个为业界同仁提供技术交流的平台。您可以在论坛上提出技术问题，交流行业经验，寻找供应商等。请勿发送任何招聘，广告信息。（注：对于寻求供应商的邮件，请勿回复[log in to unmask],请私下和发件人联系）。如您需要退出该邮件论坛，请直接发送邮件至 [log in to unmask]<mailto:[log in to unmask]> ,谢谢。
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]<mailto:[log in to unmask]>
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
TGAsia是一个为业界同仁提供技术交流的平台。您可以在论坛上提出技术问题，交流行业经验，寻找供应商等。请勿发送任何招聘，广告信息。（注：对于寻求供应商的邮件，请勿回复[log in to unmask],请私下和发件人联系）。如您需要退出该邮件论坛，请直接发送邮件至 [log in to unmask]<mailto:[log in to unmask]> ,谢谢。
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________