Does anyone know where we can get a good version of the vision system software for an ESI (Electro Scientific Industries) Model 1000 Smart Drill. The latest version we have is 5.64 dated 04/03/01 but is corrupt. This drill has a Windows-based GUI that interfaces with the vision system computer to run the machine. We are currently using a version 5.62. ESI no longer supports these drills and would appreciate any leads to get a good version of 5.64 (or newer) vision system software Thanks, Wm. Dean May Crane Division, Naval Surface Warfare Center (NSWC Crane) Code GXSP, Bldg. 3287E 300 Highway 361 Crane, IN 47522-5001 Phone: 812.854.3073 DSN: 482-3073 Fax: 812.854.1174 Email: [log in to unmask] http://www.navsea.navy.mil/nswc/crane/Lists/customerfeedback/NewForm.aspx Harnessing the Power of Technology for the Warfighter "FOR OFFICIAL USE ONLY - Privacy Sensitive - any misuse or unauthorized disclosure can result in both civil and criminal penalties. This transmission should be viewed only by personnel having an official "need-to-know". If you are not the intended recipient, be aware that any disclosure, copying, distribution or use of the content of this information is prohibited. If you have received this communication in error, please notify me immediately by email and delete the original message."