Ernesto, Have you considered bringing SCS people in to renovate or refurbish the machine. Quite often, automated coating machines may not get the preventative maintenance they need. I know PVA techs can come in and do a tune up on their machines. Perhaps SCS will do the same. Doug Pauls From: "Rueda, Ernesto" <[log in to unmask]> To: <[log in to unmask]> Date: 09/06/2013 09:40 AM Subject: [TN] Conformal Coating Machine Sent by: TechNet <[log in to unmask]> Hi all, I am seeking feedback from the experts about conformal coating machine. We need to buy a new conformal coating machine. The old machine (Specialty Coating System Model SCS-4398) from our other facility has been transferred to our plant. However, it is not really working good. We are using Dymax 987 Conformal Coating material. I would like feedback from the Forum as to which vendors you might recommend. Thank you in advance. Ernesto Ernesto V. Rueda | PELCO by Schneider Electric | SMT Process Engineer Phone: +1 559-292-1981 ext. 3848 | Fax: +1 559-388-3781 | Mobile: +1 559-333-3913 Email: [log in to unmask] | Site: www.pelco.com | Address: 3500 Pelco Way, Clovis, CA 93612-5699 USA ƒÀ please consider the environment before printing this email ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________