And if machine control interface, are you looking for touch-text tablets or keypad style such as those used in cellphones and game controllers, or..... Generally speaking, specific criteria for the components would be on the device, assembly, and component prints and source control drawings. Solder joint criteria would fall under the pertinent IPC specs. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D. Sent: Wednesday, July 24, 2013 3:34 PM To: [log in to unmask] Subject: Re: [TN] Looking to see if a HMI IPC standard exists Particular to machine control PCs and tablets, or control panels such as those used on medical products, or what? -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Theodore J Tontis Sent: Wednesday, July 24, 2013 3:19 PM To: [log in to unmask] Subject: [TN] Looking to see if a HMI IPC standard exists I am looking to see if there is a released IPC standard or a IPC standard being developed for the design, manufacturing, testing and or acceptance of HMI's (Human Machine Interfaces). Thank you, Ted Theodore J. Tontis CID Senior Manufacturing Engineer [cid:[log in to unmask]]<http://www.eaton.com/> 11131 Adams Road Franksville, WI 53126 Office 262-835-1552 Cell 262-510-3145 Fax 262-835-1544 ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________