Absolutely correct. The Emperor has decreed thou shall not defile the sump. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls Sent: Tuesday, December 18, 2012 1:05 PM To: [log in to unmask] Subject: Re: [TN] Source of ESD Mats Suitable for in-line wash baskets I would strongly caution against something like this. You specifically want something formulated to withstand the chemicals of water wash. This also means that there is nothing that the mats contribute to the cleaning sump. Think about how easy it is to contaminate a wash sump. Suddenly, everything is contaminated. Doug Pauls From: Mike Sewell <[log in to unmask]> To: <[log in to unmask]> Date: 12/18/2012 12:53 PM Subject: Re: [TN] Source of ESD Mats Suitable for in-line wash baskets Sent by: TechNet <[log in to unmask]> You could try something like an open ESD floor mat, cut down to size. I'm not sure how long the natural rubber would hold up to your wash process or how much spray jet shadowing is tolerable. http://www.wearwell.com/Static-Control/Conductive-Mats/Modular-WorkSafe-Light-ESD.html Mike> Date: Tue, 18 Dec 2012 15:33:01 +0000 > From: [log in to unmask] > Subject: [TN] Source of ESD Mats Suitable for in-line wash baskets > To: [log in to unmask] > > Does anyone have a source for soft polymer ESD grid mats (similar to screening but with ~ 1 inch openings) that would be suitable to go through an inline wash system? > > The function of these mats would be to serve as a cushion to the > bottom side SMT components as they get shifted by the wash jets. > > Finding them ESD safe (safer/safe-ish ) is the challenge. > > Thanks in advance. > > Rich Kraszewski/PLEXUS > > ______________________________________________________________________ > This email has been scanned by the Symantec Email Security.cloud service. > For more information please contact helpdesk at x2960 or [log in to unmask] > ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the Symantec Email Security.cloud service. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________