Hi HAO,
建議可朝如下現象來觀察及分析
1.
如異常產生在綠油表面-
A.
ENIG
後產生之綠油色差
B.
綠油塞孔後產生厚度色差
2.
如異常產生在基材面
A.
鑽孔後產生之基材分層或微裂.
以上可再請
PCB 供應商提出較詳細之分析來層別問題及獲得改善!
Best Regards.
黃國益 ( Jackie Huang )
Molex Copper Flex Products, Asia
Engineering Manager
886 2 8511-0988 X 2801 (Desk)
886 2 8511-0989 (Fax)
886
983-075-923 (Mobile)
[log in to unmask] (e-mail)
From: TGAsia [mailto:[log in to unmask]]
On Behalf Of wuhao
Sent: Friday, August 26, 2011 12:43 PM
To: [log in to unmask]
Subject: [TGAsia]
All :
Does anyone can share the experience of this similar case ?thank you !
Best regards
HAO
From: wuhao [mailto:[log in to unmask]]
Sent: Thursday, August 25, 2011 4:58 PM
To: 'Asia Committe Task Group Forum'
Subject: RE: [TGAsia]
Dear all
:
在我司產線上發現有1款pcb vias
周圍有白色斑跡
現象,如下圖
請大家分析下造成此問題原因
thanks
HAO
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________