我们之前有处理过这样的case,很难插之前的插入力是35N,后来我们更改了卡勾的尺寸后插入力为10~15N是基本不费力的。 Best Regards!!! [cid:[log in to unmask]]***************************************************************************** 显示器事业部制造处工业工程部(MNT/MFG/IE/PCBA) /kelvin 冠捷电子(福建)有限公司/Top Victory Electronics (Fujian)Co.,Ltd 地址(Add):中国福建省福清市元洪路上郑 (Shangzheng,Yuanhong Road,Fuqing City,FUjian Province,P.R.China) 邮编(Postcode):350301 电话(Tel):+86-591-85285555-8560,传真(Fax):+86-591-85285447 手机(Mobile):15980730668 电邮(E-mail):wen.zhong @tpv-tech.com<mailto:[log in to unmask]> 网址:http://www.tpv-tech.com<http://www.tpvaoc.com/> ***************************************************************************** 发件人: River Huang-3692CE [mailto:[log in to unmask]] 发送时间: 2011年3月23日 13:55 收件人: Wen Zhong 钟文; Asia Committe Task Group Forum 主题: RE: 求助手插件按压力大小标准 Zhong Wen, “。。。。。。,15N左右比较好插入”,15N是指操作员用这么大的力能够把原件插好且无吃力的感觉吗? 至于PCB变形我们在操作的时候也一直用托盘支撑在下面防止因PCB变形产生缺陷风险,现在就是想知道有无插件压力方面的标准。 ________________________________ From: Wen Zhong 钟文 [mailto:[log in to unmask]] Sent: 2011年3月23日 12:33 To: Asia Committe Task Group Forum; River Huang-3692CE Subject: 答复: 求助手插件按压力大小标准 之前我们工厂有测试过,15N左右比较好插入。 象前面几个仁兄说的,主要还是担心难插造成板子变形后应变太大导致零件断裂(可增加载具)。 Dear all: Best Regards!!! [cid:[log in to unmask]]***************************************************************************** 显示器事业部制造处工业工程部(MNT/MFG/IE/PCBA) /kelvin 冠捷电子(福建)有限公司/Top Victory Electronics (Fujian)Co.,Ltd 地址(Add):中国福建省福清市元洪路上郑 (Shangzheng,Yuanhong Road,Fuqing City,FUjian Province,P.R.China) 邮编(Postcode):350301 电话(Tel):+86-591-85285555-8560,传真(Fax):+86-591-85285447 手机(Mobile):15980730668 电邮(E-mail):wen.zhong @tpv-tech.com<mailto:[log in to unmask]> 网址:http://www.tpv-tech.com<http://www.tpvaoc.com/> ***************************************************************************** 发件人: TGAsia [mailto:[log in to unmask]] 代表 River Huang-3692CE 发送时间: 2011年3月23日 10:32 收件人: [log in to unmask] 主题: [TGAsia] 求助手插件按压力大小标准 各位好: 有些产品的手插件,操作员每次都需要花很大的力才能把件插入孔内(排除材料issue),时间长了难免手会产生疼痛感,有谁知道插孔件按压力大小的IPC标准,谢谢能分享一下! Best regards ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please contact helpdesk at x2960 or [log in to unmask] ______________________________________________________________________