Chris,

Yes, since there may different fill materials, construction
idiosyncrasies and no specific cap requirements or no cap required at
all, the caveat was not included. 

If smitten with verbosity, add the following:

*         If CAP plating is required it shall be AABUS.

 

Dewey

 

-----Original Message-----
From: IPC-600-6012 [mailto:[log in to unmask]] On Behalf Of Chris
Mahanna
Sent: Wednesday, February 09, 2011 2:38 PM
To: [log in to unmask]
Subject: [IPC-600-6012] buried cap thickness

 

I assume that we purposely did not include a caveat for buried cap
thickness in 6012C?

 

My particular interest is the case where the design predates 6012C and
gives no more specifics than: "fill, planarize and cap"

 

Thanks

Chris

 

Chris Mahanna

President, Technical Manager

Robisan Laboratory Inc.

6502 E. 21st Street

Indianapolis, Indiana 46219

317-353-6249

 

 

______________________________________________________________________

This email has been scanned by the MessageLabs Email Security System.

For more information please contact helpdesk at x2960 or
[log in to unmask] 

______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask] 
______________________________________________________________________