Good one!

I consider myself to be a critical reader but I've seen that dozens of times and it never even occurred to me.

Maybe it should say "Reduced Producibility - some other word there" , dontcha think? 

Jack

.

On Wed, Nov 24, 2010 at 2:01 PM, Brooks, Bill <[log in to unmask]> wrote:


 

3 producibility levels:

 

Level A General Design Producibility - Preferred

Level B Moderate Producibility - Standard

Level C High Producibility - Reduced

 

‘High’ producibility (in English) implies that the board is very producible when in fact it should be referencing the ‘least’ producible condition… or MOST DIFFICULT to produce.

It seems the terminology that was used earlier in the spec at 1.6.2 was somehow incorporated into this description when it should not have.

 

Perhaps it should read Level C Low Producibility – Reduced…?

 

That’s my contribution for this year… I’m done. (Can I go home now?)

J

 

Everyone have a safe holiday weekend… J

 

Bill Brooks | Datron World Communications, Inc.
PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 | [log in to unmask]
3055 Enterprise Court, Vista, CA 92081 | www.dtwc.com

Performance You Require. Value You ExpectTM


From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks, Bill
Sent: Tuesday, November 16, 2010 1:20 PM
To: [log in to unmask]
Subject: Re: [DC] Rick Hartley contact info

 

Thank you all for the great responses… I got it.

J

I knew I could count on our community to come thru… J

 

Bill Brooks | Datron World Communications, Inc.
PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 | [log in to unmask]
3055 Enterprise Court, Vista, CA 92081 | www.dtwc.com

Performance You Require. Value You ExpectTM


From: DesignerCouncil [mailto:[log in to unmask]] On Behalf Of Brooks, Bill
Sent: Tuesday, November 16, 2010 10:56 AM
To: [log in to unmask]
Subject: [DC] Rick Hartley contact info

 

Does someone have Rick Hartley’s phone number?

I want to talk with him for a minute or two…

Please send it to me offline… thanks.

 

Bill Brooks | Datron World Communications, Inc.
PCB Designer/Engineer | Office: 760-602-7004| Fax: 760-597-3777 | [log in to unmask]
3055 Enterprise Court, Vista, CA 92081 | www.dtwc.com

Performance You Require. Value You ExpectTM


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
-------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil
To temporarily stop/(start) delivery of DesignerCouncil for vacation breaks send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext. 2815
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil
To temporarily stop/(start) delivery of DesignerCouncil for vacation breaks send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext. 2815
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil
To temporarily stop/(start) delivery of DesignerCouncil for vacation breaks send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext. 2815
-------------------------------------------------------------------------------


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please contact helpdesk at x2960 or [log in to unmask]
______________________________________________________________________
-------------------------------------------------------------------------------
DesignerCouncil Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field):
SIGNOFF DesignerCouncil
To temporarily stop/(start) delivery of DesignerCouncil for vacation breaks send: SET DesignerCouncil NOMAIL/(MAIL)
Search previous postings at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext. 2815
-------------------------------------------------------------------------------