Doug, If you can not find the weighing boats you like, you might try to make them yourself - subject to how many you need. Get the thickest aluminum foil you can find at the store/supplier, 2-3X layers if necessary, and form it over a mandrel of some nature [eg - a pine furring strip, with rounded edges, or a suitable cardboard box]. Trim if necessary. May have to provide a carrier tray to move the filled tray to your oven, etc. Steve C -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas Pauls Sent: Thursday, January 21, 2010 12:01 PM To: [log in to unmask] Subject: [TN] aluminum weighing boats Good morning all, A quick question for the group. I am looking for a source of aluminum weighing "boats", that would be about 4-6" long, 1-2" wide and maybe 1/2" deep. Has to be aluminum because the application is high temp. Needs to be disposable. Most of the chemical or lab supply place that I normally use have aluminum weighing pans/boats, but all are much smaller, usually 1-2" in diameter. I need something larger. Thanks. Doug Pauls Rockwell Collins --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------