Yeah, I was hoping that the IPC had a formula by now that would be close but it doesn't look like it. There are quite a bit of variables in micro vias that are not present in a standard via. I may end up ordering a board full of vias and testing them. Thanks Ken -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Rex Waygood Sent: Friday, July 24, 2009 3:46 AM To: [log in to unmask] Subject: Re: [TN] uVia Capacity Ummm. Not being an expert here but having seen sections of microvias I would be inclined to put in a large safety factor. Regards Rex -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Dwight Mattix Sent: 23 July 2009 19:53 To: [log in to unmask] Subject: Re: [TN] uVia Capacity IPC-2221 figure 6-4 "Conductor thickness and width for internal and external layers." Use the magic of pi to figure the equivalent flat trace width, check vs the charts and voila! If it's a solid copper filled uVia then look for round wire equivalent. At 10:32 AM 7/23/2009, Kenneth Wood wrote: >Hi, > >Does the IPC, or anyone, have current capacity numbers for micro vias? > >Thanks > >Ken > > > > > > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 15.0 To >unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt >or (re-start) delivery of Technet send e-mail to >[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing >per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: >http://listserv.ipc.org/archives Please visit IPC web site >http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional >information, or contact Keach Sasamori at [log in to unmask] or >847-615-7100 ext.2815 >----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------