Purell: Ingredients: Active Ingredients: Contains: Ethyl Alcohol (62%) Inactive Ingredients: Water, Glycerin, Isopropyl Myristate, Propylene Glycol, Tocopheryl Acetate, Aminomethyl Propanol, Carbomer, Fragrance (parfum) The glycerin and propylene glycol would concern me, they're both hydrophillic. The ethanol in the active ingredient, maybe a mixture of 60% ethanol 35% water 5% isopropanol ( to make it undrinkable, but safe enough for topical use) would be better around circuit boards. It would tend to dry the users' hands, but would not help to contaminate circuit boards. I've always found hand sanitizer superfluous, just washing ones hands with soap and water kills most germs. Karen Tellefsen - Electrical Testing [log in to unmask] 908-791-3069 Carl Proescholdt <[log in to unmask]> Sent by: TechNet To <[log in to unmask]> [log in to unmask] cc 04/27/2009 09:24 Subject AM [TN] Hand Sanitizer and PCB Assembly Please respond to TechNet E-Mail Forum <[log in to unmask]> ; Please respond to Carl Proescholdt <[log in to unmask]> With the recent news cycle and the concern over the flu virus, several people in the workforce have been asking if using a hand sanitizer such as Purell brand would be acceptable to use. From what I can see in the MSDS, the main component is alcohol, but not all ingredients are listed. I realize the best approach for actual board contact is a good hand washing and gloves, but even if we put this stuff in the breakroom, and ask that people wash and re-glove before returning to the production area, I am afraid of contaminants reaching the production floor. Also, if we don’t provide something, I suspect people will start carrying it in and using it themselves. Has anyone else turned up anything to suggest that it wouldn't be OK to use this type product in an assembly environment? Any specific brand recommendations? If only we could just build boards...Happy Monday! Carl Proescholdt dca manufacturing corp