I'm just looking into the conformal coating process. I was thinking that if we purchased a good automated spray flux system like USI that we could measure the board thickness before and then after. As long as we were higher than the IPC or customer specified minimums we should be fine. This is the first I've heard about eddy current testing. If your relying on an operator with a car type spray gun then maybe you would need some other test system. -------------- Original message -------------- From: "Stadem, Richard D." <[log in to unmask]> > Either that, or the inspector is stoned again. > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]] On Behalf Of Whittaker, Dewey > (EHCOE) > Sent: Thursday, December 04, 2008 1:45 PM > To: [log in to unmask] > Subject: Re: [TN] Conformal Coat and Eddy Currents > > You mean it is just taken for granite that it's the right thickness? > Dewey > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]] On Behalf Of Douglas O. Pauls > Sent: Thursday, December 04, 2008 12:19 PM > To: [log in to unmask] > Subject: [TN] Conformal Coat and Eddy Currents > > Good afternoon all, > > A question for this most excellent forum. Does anyone here use eddy > current methods to measure applied coating thickness on printed circuit > assemblies? If so, can you share your opinions on the methods and the > equipment? > > There are testers on the market that do this and one of our design > engineers is currently suprised at how we are using "stone age" > technologies (micrometer) to measure coating thickness. > > Doug Pauls > Rockwell Collins > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 15.0 To > unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or > (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing > per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: > http://listserv.ipc.org/archives > Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 > ext.2815 > ----------------------------------------------------- > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 15.0 To > unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or > (re-start) delivery of Technet send e-mail to [log in to unmask]: SET > Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the > posts: send e-mail to [log in to unmask]: SET Technet Digest Search the > archives of previous posts at: http://listserv.ipc.org/archives Please > visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for > additional information, or contact Keach Sasamori at [log in to unmask] or > 847-615-7100 ext.2815 > ----------------------------------------------------- > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 15.0 > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for > additional information, or contact Keach Sasamori at [log in to unmask] or > 847-615-7100 ext.2815 > ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------