Hi Leif! I have your pictures posted. Go to: http://stevezeva.homestead.com/files/air_bubbles_and_craters_1.jpg http://stevezeva.homestead.com/files/air_bubbles_and_craters_2.jpg Is the percentage of metals the same as your leaded paste? I also think the rheology the paste won't be the same with as it is with the leaded paste, so there will most likely have to be changes with the set-up of the print. It almost looks like the separation speed is too fast, and the paste isn't given time to pull away from the inside of the apertures causing the crater... Steve -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Leif Erik Laerum Sent: Wednesday, July 30, 2008 8:29 AM To: [log in to unmask] Subject: [TN] Solder Paste with craters. Technetters, We are having an issue with solder fines on our lead free boards. We are using SAC305 WS and no nitrogen. I noticed that our boards have craters in the paste on the pads after being printed. Not all pads are deposited this way, but maybe 25%. These craters have an air bubble in them. The bubbles usually burst before the boards goes into the P&P, but the crater stays. The screening process is exactly the same for leaded and unleaded paste. The leaded paste does not behave this way. Could these craters be a symptom of the cause of the solder fines? Anyone have any experience with this? How do I go about posting pictures to stevezeva.homestead.com?. -- Leif Erik Laerum Quality Assurance Manager Texas Memory Systems [log in to unmask] Tel: (713) 266-3200 x468 www.texmemsys.com --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------