Thank you Ken. 

Was it cracking along or throught the layers in your case?

Regards,

Vladimir

----- Original Message -----
From: TechNet <[log in to unmask]>
To: [log in to unmask] <[log in to unmask]>
Sent: Mon Jul 14 12:36:33 2008
Subject: Re: [TN] Ceramic caps

Hi Vladimir,

I posted a similar question not too awfully long ago. I had several of the
same parts on a board but only one was cracking. In my case what it turned
out to be was a very large lead from a connector frame soldered very close
to the cap. The CTE mismatch caused the part to crack.

KennyB

-----Original Message-----
From: Igoshev, Vladimir [mailto:[log in to unmask]] 
Sent: Monday, July 14, 2008 8:23 AM
To: [log in to unmask]
Subject: Re: [TN] Ceramic caps

Different locations, identical caps placed along and normal to the board.
:-)

Regards,

Vladimir

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------