Hello,
          I am getting some conflicting answers about the minimum thru via size for .062" thick board class 3.
The IPC -2222 spec 9.2.2.3 specifies Minimum Drilled Hole size for Plated thru hole Vias for class 3 as .012"
For board thickness .062".
From other sources I heard that class 3 could have 8 mil drill as long as the annular ring 1 mil internal and 2 mil external
Is maintained.
Any inputs on this matter are appreciated

Mirka

Mirka Halas | PCB Designer, Librarian | EuroTech Inc | O: +1 800.541.2003 x101
[log in to unmask]<mailto:[log in to unmask]>

---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 15.0
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------