正常情况下不会有这样的状况的，如果有你就要看你们炉温的设置方面有没有问题了。
-----Original Message-----
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Jimmy Qiu
Sent: Friday, January 18, 2008 8:56 AM
To: [log in to unmask]
Subject: Re: [TGA] 有金手指的S C,其金手指上殘留指紋是 否 可 接受?
高温胶带撕掉后,可能会在金手指有胶残留.
_____
From: TGAsia [mailto:[log in to unmask]] On Behalf Of 李义
Sent: Thursday, January 17, 2008 11:16 PM
To: [log in to unmask]
Subject: Re: [TGA] 有金手指的S C,其金手指上殘留指紋是否 可 接受?
同意这种操作方式；
为了保护金手指，最好的方法是在装配工段前均使用高温胶带保护金手指位置。
Best Regards
在2008-01-17，"Zhang Meijuan" <[log in to unmask]> 写道：
我认为单纯的手指印用橡皮可以擦干净，同时最好用气枪吹干净，避免二次污染
-----Original Message-----
From: TGAsia [mailto:[log in to unmask]] On Behalf Of Gause Hu
Sent: Thursday, January 17, 2008 9:58 AM
To: [log in to unmask]
Subject: Re: [TGA] 有金手指的SC,其金手指上殘留指紋是否可 接受?
如果只是手指印， 应该是可以用橡皮擦等物擦去掉的。 擦掉后就不影响产品的品质了。
Best Regards，
Gause Hu (胡高斌）
Procurement Engineering-PCB
IBM Procurement China Limited
Tel:86-755-86361214 ext.:1214
Fax: 86-755-26728201 E-mail:[log in to unmask]
Rambo Li <[log in to unmask]>
Sent by: TGAsia <[log in to unmask]>
2008-01-17 09:53
Please respond to
Asia Committe Task Group Forum <[log in to unmask]>; Please respond to
[log in to unmask]
To
[log in to unmask]
cc
Subject
Re: [TGA] 有金手指的SC,其金手指上殘留指紋是否可接受?
不能接受，时间长了金手指会被腐蚀而变黑的。。影响接触功能
Hong Qin <[log in to unmask]>
Sent by: TGAsia <[log in to unmask]>
01/17/2008 08:45 AM
Please respond to
Asia Committe Task Group Forum <[log in to unmask]>; Please respond to
[log in to unmask]
To
[log in to unmask]
cc
Subject
[TGA] 有金手指的SC,其金手指上殘留指紋是否可接受?
大家好:
請教一下:金手指上殘留指紋(如下圖所示)是否可以接受?為什麼呢?謝謝! :-)
<http://g3a81.mail.163.com/a/s?func=mbox:getMessageData&sid=*&mid=324:xtbBRB19t0X0KuEPAgAAmk&part=3>
Best Wishes!
Qin-hong/62296
*：[log in to unmask] <mailto:[log in to unmask]>
_____
LOGO<http://proimg.163.com/channel6/003917/yili080116_5050.jpg>
又过年了，千万别忘了把你的爱带回家 <http://popme.163.com/link/003917_0115_1815.html>
为爱珍选，唯有金典 <http://popme.163.com/link/003917_0115_1815.html>