Hi All! We build survival radios here, "Prick-90's". Those of you who have flown in the military know them well. We build a lot of little modules that go into these radios, then the modules have a frame or housing installed on them, and then the whole kit and kaboodle goes into the radios. We have the housings built by a company in South America, and we supply them with the leads that go into the housings...their specialty is plastic. But now they've run out of leads. The story is that we bought a bazzillion of them years ago, and now nobody knows where they were purchased from. So I've been asked if I know of anyplace that makes things like this. I've got a photo of the housing with the leads here: http://stevezeva.homestead.com/files/PRC_Frame.jpg It's just a flattened piece of tin plated copper/iron alloy per ASTM B465 that is .270" long, .018" wide, and .010" thick. I've got a call into Interplex NAS. Is there anyplace else I might check out for these leads? TIA! Steve Gregory --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------