Yes. Perhaps my response was not sufficient, or not the information Pradeep is looking for. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Hogg, Blair K. Sent: Monday, July 30, 2007 11:20 AM To: [log in to unmask] Subject: Re: [TN] ENIG solderability Didn't we just have this discussion last week? That soldering to ENIG required higher temps and a longer TALT than HASL because the tin needs to form intermetallics with nickel? Blair -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of mp3 Sent: Monday, July 30, 2007 9:55 PM To: [log in to unmask] Subject: [TN] ENIG solderability Date: Tue Jul 24 09:50:21 PDT 2007 From: [log in to unmask] To: technet <[log in to unmask]> Subject: ENIG solderability Dear Sir, We have been having a few complaints from our customers regarding problems wrt solderability, especially in SMD and BGA pads with ENIG finish. We have checked the solderability at our end as per IPC and we find it to be acceptable. The customer says he is following the same parameters as that for HASL boards for assembly. Can we get some details on the extra precautions wrt assy of ENIG boards Rgds Pradeep.M AGM - Customer Support Micropack Limited Plot#16, Jigani Industrial Area, Anekal Taluk, Bangalore - 562 106 India Tel : 91 80 7825223 / 7825224 ------------------------------- Micropack Ltd, Bangalore, India !-- Virus-Free Mail Using AntiVirus for IQ Mail & QuickHeal Engine --! --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- ******************************************************************* This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.Hubbell.com - Hubbell Incorporated --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------