M-675 was an old IPC workshop handbook on microsectioning. 2.1.1 and MS-810 are more up to date references. Best regards, Dave David W. Bergman, CAE Vice President, Standards, Technology and International Relations IPC 3000 Lakeside Drive # 309S Bannockburn, IL 60015 Phone 847-597-2840 Fax 847-615-5640 Mobile 847-867-1388 Main 847-615-7100 email [log in to unmask] www.ipc.org -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Mikell Sent: Wednesday, April 18, 2007 2:50 PM To: [log in to unmask] Subject: Re: [TN] IPC-M-675 The IPC website has a master list of standards, etc., listing their revision. <http://www.ipc.org/4.0_Knowledge/4.1_Standards/revstat1.htm> That list has NO specification with 675 as its number or the letter "M" as its classification. Time to send the sacrificial lamb back to the customer for furthur information. Goog luck, Steve Mikell [log in to unmask] ----- Original Message ----- From: "Alistair Murray" To: [log in to unmask] Subject: [TN] IPC-M-675 Date: Wed, 18 Apr 2007 12:54:50 +0100 Hi to all I am unable to find the above specification that has been referred to me by a customer. Can anyone help? Thanks in anticipation A Murray Artetch Circuits --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 15.0 To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------