Hi Jim, When we (sometimes) create a board mechanical constraints drawing, and use a schematic to design the gerber layout (one up), then we create a dwg for the panel based on optimized input from the team and board fab shops, which finally results in Gerber which includes the panel but only has one location populated. The pwb house then uses the Gerber and the panelized drawing to "format" the panel (for example: AB flip, 180 degree rotations, etc.) Having said that, I am interested to see how others deal with creating the stencil for a multi-up panel. Where in your process is the stencil gerber data created for a multi-up panel? Is it created by the designers, or is it step and repeated (flipped, rotated, etc) by the stencil house? Or does Manufacturing do it? What about if you use multiple outside design houses? Thanks in advance, Phil At 02:07 PM 2/19/2007 -0500, Marsico, James wrote: >Hello TechNet... > >A quick question. When designing small PWBs, do you design the paneled >array or do you supply a one-up design and ask your PWB supplier to >design the panel for you? > > > >Jim Marsico > >EDO Corporation > >1250 New Horizons Blvd. > >North Amityville, NY 11701 > >631-630-5079 > >[log in to unmask] > > > > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 1.8e >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt or (re-start) delivery of Technet send e-mail to >[log in to unmask]: SET Technet NOMAIL or (MAIL) >To receive ONE mailing per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 >for additional information, or contact Keach Sasamori at [log in to unmask] or >847-615-7100 ext.2815 >----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------