Is it an antenna? Happened to see advertisment on a odd dispenser that seems to have real long strokes: http://news.thomasnet.com/images/large/026/26266.jpg Disptech.com Inge -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Stadem, Richard D. Sent: den 7 september 2006 23:20 To: [log in to unmask] Subject: [TN] Epoxy and Solder paste dispensers Hi folks, I need some help. I have a project that involves dispensing both epoxy and solder paste to a 6 foot long pwb. The pwb is only 2" wide. It will be mounted on a carrying fixture. I am looking for dispensers with a pass-through conveyor system that can accomodate this long pwb, even if I have to dispense to a section at a time and then increment the pwb forward. Because the circuit board has a repeating pattern throughout its entire length, I am thinking that I can create the dispense program and then simply step and repeat it for sections (say 2 feet at a time) of the 6 foot circuit board, but I want the system to move the circuit board through the dispenser automatically. The contract is for very high volumes. Therefore I am looking for a dispenser, but I am having a lot of difficulty talking to Asymtek, Camelot, etc. and trying to figure out which models can do something like this. The sales reps do seem to be technically challenged. I do not have a lot of experience with epoxy dispensers, so I am looking for someone who does who can point me in the right direction to find a model that can do something like this. I know that some dispensers can handle reel-to-reel flex, for example, and I would appreciate hearing from those who use these machines on a daily basis. Thanks in advance. --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------