Gosh Rudy, say what you think, don't hold back. IPC is a very professional organization that has many times over created an easier way for industry to provide quality products and it is a shame that you choose such an open forum to tongue lash this effort. It seems to me that either yourself or Tom Newton has made an error. I think we are talking about two different documents here. Humans do error Rudy, so why don't you pick your tongue up off the floor and try and unwind the error before slamming a very hard working organization made up of many many volunteers who really do care. Peggi J. Blakley Industry Liaison Supporting the Warfighter Crane Division, Naval Surface Warfare Center Code 6086, Building 3287 East 300 Highway 361 Crane, IN 47522-5001 Ph: 812-854-2086 DSN: (482) Fax: 812-854-1174 Email: [log in to unmask] -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of R Sedlak Sent: Tuesday, August 29, 2006 21:35 To: [log in to unmask] Subject: [TN] Does anyone else on Technet find this situation beyond comprehension? Just in case anyone still has any remaining hopes that the IPC might actually someday attempt to achieve something worthwhile, or perhaps attempt to minimize the confusion in our world, I offer this e-mail message which I received from the IPC in response to my negative vote on the proposed Immersion Tin standards. It is important to realize, to get the full flavor of this message, that the standard was submitted to me for my review with two options: 1. Accept as written, or 2. reject, with reasons given for rejection. I rejected, because the standard was written in a way which was essentially unintelligible, and I could not even figure out what they were trying to say. I received the following message in return. --------------------------------- From: Tom Newton [mailto:[log in to unmask]] Sent: Tuesday, August 29, 2006 6:46 AM To: Rudy Sedlak Subject: Your Negative Vote Submitted Against IPC J-STD-003B Rudy Sedlak: The IPC 5-23a Printed Wiring Board Solderability Specification Task Group is in the final stages of resolving all Technical Comments for the initial Ballot or potential upcoming Negative Vote Resolution Ballot on IPC J-STD-003B, Solderability Tests for Printed Boards document. Sadly, this is admittedly a very long time since the original Ballot was closed at the end of June 2006. Never-the-less, I am now responding back to you on your Negative Vote submitted on June 26, 2006. Please note that I have attached this response to the full string of E-mail correspondence we have had on this document, so that the 'history' of these communications is recorded. Your vote on the ballot for IPC J-STD-003B will be shown as having been submitted toward the Ballot on IPC J-STD-003B. That is, IPC will show that you did reply to the Ballot. However, because the following statement: "The wording is so difficult to understand and convoluted, and it is so verbose, it is essentially unintelligible. (And if I am offending key people, I apologize, but somebody has to draw a line in the sand.)" that was provided as your sole support for your Negative Vote does not contain at least one specific technical detail with a suggested technical solution, your negative vote will not be accepted by the 5-23a Task Group. This response will be duly recorded with all of the actions concerning the IPC Ballot for the IPC J-STD-003B document. Additionally, if IPC has communication with the American National Standards Institute (ANSI) on this document, your vote will be shown as an "Unsupported Negative Vote" (one of ANSI's vote categories). Accordingly, IPC thanks you for your ballot submission on IPC J-STD-003B. Sincerely, Thomas D. Newton Director PCB Programs, Standards and Technology IPC - Association Connecting Electronics Industries 3000 Lakeside Drive; Suite 309-S Bannockburn, IL 60015 Direct: 847-597-2849 Main: 847-615-7100 Fax: 847-615-7105 E-mail: [log in to unmask] web: www.ipc.org --------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- How low will we go? Check out Yahoo! Messenger's low PC-to-Phone call rates. --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- This message (including any attachments) contains confidential and/or proprietary information intended only for the addressee. Any unauthorized disclosure, copying, distribution or reliance on the contents of this information is strictly prohibited and may constitute a violation of law. If you are not the intended recipient, please notify the sender immediately by responding to this e-mail, and delete the message from your system. If you have any questions about this e-mail please notify the sender immediately. --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------