We are quoting on a PCB which has some unique, at least to us, manufacturing
requirements and I was hoping that someone might be able to provide insight
on some of the challenges we foresee.



There are many hurdles to clear with this part, two of which are;



-          This 3 layer PCB must have immersion tin plating on all
conductors, inner and outer layers.  Does anyone know if the pre-preg will
successfully bond to the immersion tin plated surfaces?

-          The outer layers of this part will have areas of selective gold
plating, 50u",plated directly to copper, no nickel interface.  Are we likely
to see problems with bond between the gold and copper?



John Parsons




---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------