Hi Kenny

Is this a new product or an old one that has only now exhibited tis
problem?

Looking at the photo, I suspect the problem is related to the
reflective UV.

A suggestion, try warming the assembly to around 40DegC then spray
apply the coating. This "trick" can often overcome these issues
because the warmth of the assembly drives off the solvent faster than
the de-wetting forces. Don't make the assembly too hot, or you can
induce bubbles in the coating.

Hope this helps

Kindest regards
Graham Naisbitt

[log in to unmask]

Phone: +44 (0)12 5252 1500
Mobile: +44 (0) 79 6858 2121


---------------------------------------------------
Technet Mail List provided as a service by IPC using LISTSERV 1.8e
To unsubscribe, send a message to [log in to unmask] with following text in
the BODY (NOT the subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest
Search the archives of previous posts at: http://listserv.ipc.org/archives
Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815
-----------------------------------------------------