SWEMCO is now QC08000 Certified. I would like to thank everyone for their hardwork over these past 4 months. http://www.swemco.net/documents/Rohs%20certification%20QC%20080000%20press%2 0release.pdf http://www.swemco.net/ Ronald D. Peeler Jr., B.S. IE Process Engineer SWEMCO Moorestown, NJ 08057 Tel: (856).222.9900 ext. 31 Cel: (484).948.0779 Fax: (856).222.0700 [log in to unmask] -----Original Message----- From: John Burke [mailto:[log in to unmask]] Sent: Monday, May 01, 2006 2:41 PM To: [log in to unmask] Subject: Re: [TN] Materials Declaration Hi Genny. Originally I was trying to get data to RoHS declaration PLUS the Jig list as well as manufacturing data (Class 4). In my previous employment, the problem I had with this was that in a lot of cases I was getting zero response due to the jig a and b lists. When I "toned down" the requests to "just RoHS" (class 1) or "RoHS plus manufacturing info (class 2) the response hit rate was much better as well as faster. There are professional "data gathering" companies out there who have an amazing record of response rate since they have the bandwidth to be tenacious. I have found that setting realistic goals on the response time of around 1 month and sending "reminder" emails as a count-down" to the goal dates worked well. Unfortunately, there are only 2 months left...............8-( John John Burke Senior Manager - Operations , Optichron [log in to unmask] W: 510 249 5233 M: 408 515 4992 http://www.optichron.com Profile: https://www.linkedin.com/e/fps/2665502/ -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Genny Gibbard Sent: Monday, May 01, 2006 10:56 AM To: [log in to unmask] Subject: Re: [TN] Materials Declaration I have more questions about this. I was just taking a closer look at the forms (finally had the time). I like how simple it appears to fill out. What class were you trying to get people to fill it out to? Right now, we probably only need class 1, but we might need a higher class at a later date. I don't know whether to try to get the higher class data right away, or go back to suppliers later if needed. If you were requesting a higher class, were you having much trouble getting the additional detailed info out of suppliers, or did they generally have that available already? -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of John Burke Sent: April 24, 2006 10:35 AM To: [log in to unmask] Subject: Re: [TN] Materials Declaration I worked on some of the committee sessions for the IPC 218 and so had an early start. To be honest though I just threw together a PowerPoint showing which bits they had to fill out and why. Sent them electronically BUT you should also send them a note with a link to the adobe wed site so that they open them with the free version 7 reader otherwise the whole thing gets messed up. John John Burke Senior Manager - Operations , Optichron [log in to unmask] W: 510 249 5233 M: 408 515 4992 http://www.optichron.com Profile: https://www.linkedin.com/e/fps/2665502/ -----Original Message----- From: Kane, Amol (349) [mailto:[log in to unmask]] Sent: Monday, April 24, 2006 9:15 AM To: John Burke; TechNet E-Mail Forum Subject: RE: [TN] Materials Declaration Thank you John, A couple of follow up questions if you may.....did you yourself attend any training on the use of the document? The standard DOES look pretty self explanatory...also are you filing these electronically to/from the vendors or sending hard copies to the vendors and then keeping in your records? I have to make the implementation decision soon, so getting all the info I can before making a final plan. Regards, Amol Kane M.S (Industrial Eng.) Process Engineer Harvard Custom Manufacturing 941 Route 38 Owego, NY 13827 Phone: (607) 687-7669 x349 [log in to unmask] -----Original Message----- From: John Burke [mailto:[log in to unmask]] Sent: Monday, April 24, 2006 12:11 PM To: TechNet E-Mail Forum; Kane, Amol (349) Subject: RE: [TN] Materials Declaration Yes, and got replies from all vendors, although we had to train most of them on filling it out. John John Burke Senior Manager - Operations , Optichron [log in to unmask] W: 510 249 5233 M: 408 515 4992 http://www.optichron.com Profile: https://www.linkedin.com/e/fps/2665502/ -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Kane, Amol (349) Sent: Monday, April 24, 2006 4:59 AM To: [log in to unmask] Subject: [TN] Materials Declaration Hi all, Has anyone started using the IPC materials declaration (IPC-1752-1 or IPC-1752-2) to ask for information from their component suppliers regarding RoHS compliancy? If not, what are the common criteria for doing this currently? Thanks, Amol Kane M.S (Industrial Eng.) Process Engineer Harvard Custom Manufacturing 941 Route 38 Owego, NY 13827 Phone: (607) 687-7669 x349 [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------