I am not sure on the reflection of UV. Regular eyeglasses will stop the direct UV. If you do not use your regular glasses, you need to use regular safety glasses when doing this to be sure. John John Burke Senior Manager - Operations , Optichron [log in to unmask] W: 510 249 5233 M: 408 515 4992 http://www.optichron.com Profile: https://www.linkedin.com/e/fps/2665502/ -----Original Message----- From: [log in to unmask] [mailto:[log in to unmask]] Sent: Thursday, April 27, 2006 5:08 AM To: TechNet E-Mail Forum; John Burke Subject: Re: [TN] UV Light cause eye cancer John, Yes and No. I am wearing normal progressive lens spectacles for both long and short-sightedness. However, during inspection, due to my long sightedness, I need to remove it in order to see properly. I usually held the board as close as 20cm or 8" away from my eyes. Does that make me prone to the UV reflection from the board. Regards, Wee Mei Quoting John Burke <[log in to unmask]>: > Wee Mei, > > You are wearing protective eye glasses when doing that right? > > John > > -----Original Message----- > From: TechNet on behalf of Wee Mei > Sent: Wed 4/26/2006 7:02 PM > To: [log in to unmask] > Cc: > Subject: [TN] UV Light cause eye cancer > > > > Morning, > > I just learned from TV news in Singapore that the eye doctors are seeing an > increase in eye cancer due to UV from sunlight. The symptoms of dry eyes, red > vessels and small lump on the eye ball described by the eye doctors on TV are > what I have experience recently. > > I got worry as I have been inspecting conformal coating using UV lamp daily > between 15 min to 2 hours at a stretch. As for my colleague who manual coat > the boards, he can easily spent 4 - 5hours daily at such work. Can someone > provide some adivise on the effect. > > We are using Long awve UV 365nm. The UV lamp is from Spectronics Corp code > BLE-760B. > > Thanks in advance. > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 > for additional information, or contact Keach Sasamori at [log in to unmask] or > 847-615-7100 ext.2815 > ----------------------------------------------------- > Wee Mei > > > --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------