Hi, We are trying to produce a low number of cavity boards (5-10 per run). No parts will be used, so we're just looking for fabrication. These boards are from 6-10 layers, and fairly large, roughly 22" x 25" with a cavity of 8" x 12" through the bottom layer. Pads and traces will be on the exposed cavity. Does anyone know of places which can fabricate such a cavity board? Thanks, Carol Carol Chapman, CID+ ECAD Designer, Sr. Analyst Dell, Inc. One Dell Way Round Rock, TX 78682 512.728.4494 --------------------------------------------------------------------------------- DesignerCouncil Mail List provided as a free service by IPC using LISTSERV 1.8d To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF DesignerCouncil. To temporarily stop/(restart) delivery of DesignerCouncil send: SET DesignerCouncil NOMAIL/(MAIL) Search previous postings at: www.ipc.org > On-Line Resources & Databases > E-mail Archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ---------------------------------------------------------------------------------