Hi, In discussion with European Commission, last week, the representative indicated that the RoHS July 1st, 2006 date will not be moving from a compliance stand point. However, in discussion with various EU State representatives, the "enforcement date" is anticipated to be a moving target and at this time is really unclear if enforcement dates would be announced. Ireland has already begun WEEE enforcement for household Electronics, at the retail store level, and has issued their first fines. Thus, I would work towards the July 1st, 2006 deadline or if you are unable to meet this date seek risk assessment guidance. On the Automotive ELV (End of Life Vehicle Directive) standpoint: Reference: 2000/53/EC Directive paragraph section 11, (11) "... In particular the use of lead, mercury, cadmium and hexavalent chromium should be prohibited." This directive has been amended multiple times with the latest amendment completed September 20th, 2005 - addressing the thresholds and exemption to hazardous substances for vehicles: 2005/673/EC amending Annex II of Directive 2000/53/EC of the European Parliament and of the Council on end-of-life vehicles. On the reliability front - the impact is still unknown to what the long term reliablity will be, However, from the processing stand point Tin whiskers, Proper filling of thru holes, and Solder plating corrosion - are all current electronic industry issues and concerns in the conversion to RoHS compliance. I hope this helps. Best regards, Paula [log in to unmask] ----- Original Message Follows ----- From: Jon McDowell <[log in to unmask]> To: [log in to unmask] Subject: Re: [TN] RoHS Directive status??? Date: Fri, 10 Feb 2006 08:05:41 -0700 > Thanks Ramon > > However, I looked through the site and could not find > anything I could use. Any other thoughts? > > -----Original Message----- > From: TechNet [mailto:[log in to unmask]] On Behalf Of Ramon > Essers Sent: Friday, February 10, 2006 7:45 AM > To: [log in to unmask] > Subject: Re: [TN] RoHS Directive status??? > > More info can be found in the FAQ WEEE/RoHS that can be > downloaded from http://piekforum.com/default.asp. Go to > the toppic lead free or download the fraq from > www.piekiec.com/downloads/faq_weee.pdf > > With kind regards, > > Ramon Essers > > -----Oorspronkelijk bericht----- > Van: TechNet [mailto:[log in to unmask]] Namens Jon McDowell > Verzonden: 10 February 2006 15:36 > Aan: [log in to unmask] > Onderwerp: [TN] RoHS Directive status??? > > Hello netters > > I was wondering if I could get some information about the > status of the RoHS Directive. > > We have been hearing things like: > > Have 9 states already outlaw certain RoHS > materials effective Jan 1, 2006? > Due date of July 1 is being moved back for the > auto industry; does anyone know where any document to > substantiate this can be found? > Lead free solder has problems with reliability: > Tin whiskers. > Proper filling of thru holes. > Solder plating corrosion. > > > Any expertise in this area would be greatly appreciated as > I am hearing everyone is quite confused about the status > of the RoHS Directive . > > > > > Thank You > Jon McDowell > Electronic Controls Co (ECCO) > 833 W Diamond St > Boise Id 83705 > P 208 395-8025 > > > > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using > LISTSERV 1.8e To unsubscribe, send a message to > [log in to unmask] with following text in the BODY (NOT the > subject field): SIGNOFF Technet To temporarily halt or > (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive > ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: > http://listserv.ipc.org/archives Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 > for additional information, or contact Keach Sasamori at > [log in to unmask] or 847-615-7100 ext.2815 > ----------------------------------------------------- > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using > LISTSERV 1.8e To unsubscribe, send a message to > [log in to unmask] with following text in the BODY (NOT the > subject field): SIGNOFF Technet To temporarily halt or > (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive > ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest Search the archives > of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for > additional information, or contact Keach Sasamori at > [log in to unmask] or 847-615-7100 ext.2815 > ----------------------------------------------------- > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using > LISTSERV 1.8e To unsubscribe, send a message to > [log in to unmask] with following text in the BODY (NOT the > subject field): SIGNOFF Technet To temporarily halt or > (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive > ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest Search the archives > of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for > additional information, or contact Keach Sasamori at > [log in to unmask] or 847-615-7100 ext.2815 > ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------