You will need to check you equipment. Not all equipment will be able to do boards this thick. Most equipment that can do it will still require adjustments/parts change to fit this board thickness. Jerry Dengler Production Manager Pergamon Corporation PH: 610-239-0721 Fax: 610-239-0720 -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Jason Gregory Sent: Thursday, January 19, 2006 3:52 PM To: [log in to unmask] Subject: Re: [TN] <List>[TN] Panelization of backplanes I agree. I would be scared to death to break them out by hand. Jason Gregory Manufacturing Engineer Innova Electronics (281)653-5593 (281)653-5594 fax (281)594-0602 cell [log in to unmask] -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Steve Hodge Sent: Thursday, January 19, 2006 2:40 PM To: [log in to unmask] Subject: Re: [TN] <List>[TN] Panelization of backplanes I would recommend tab routed rails and a depanelizing router. At 01:37 PM 01/19/2006, you wrote: >Hi Technos, > >I have a few 2.5"x18" PCBs here that are 0.236" thick. Among the >pressfit connectors there also are some SMT passives, so I need to pass >them on the assembly line. > >Can I panelize boards of this thickness? Is V-scoring an option? > >Thanks, >Ioan > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 1.8e To >unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt >or (re-start) delivery of Technet send e-mail to >[log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing >per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: >http://listserv.ipc.org/archives Please visit IPC web site >http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional >information, or contact Keach Sasamori at [log in to unmask] or >847-615-7100 ext.2815 >----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------