Jason, Check the Brady PAM3000 at www.bradyid.com or the Tharo PA1200 at www.tharo.com. These are both stand-alone, I've used the Brady in a past life. Minimum label size is .20 x.20, so your .12 x .12 is too small. The systems work real good on single-up boards, panels will require some sort of registration tooling (or a laser pointer) to align properly through the step and repeats. Don't know of any benchtop systems that can do panels automatically. Also, each label size requires a dedicated tamp applicator sized to match the label. Mike McMonagle Quality Engineer OYO Geospace 7007 Pinemont Drive Houston, TX 77040 713-986-8650 -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Jason Gregory Sent: Wednesday, November 30, 2005 10:15 AM To: [log in to unmask] Subject: [TN] Automated Labeling Systems Does anyone here have any good leads on automated labeling systems? I'm looking for something stand-alone, not in-line. I want to place labels ranging from .12"x.12" to .25"x1.5" on boards ranging from 1.5"x4" to 12"x12", some panelized, some not. Contact me offline if necessary. TIA Jason Gregory Manufacturing Engineer Innova Electronics (281)653-5593 (281)653-5594 fax (281)212-0844 cell [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------