Is anyone out there using or has experience with a Landrex Optima 7300 Post Reflow AOI machine?? If so what are/were your likes and dislikes about the machine. I will be inspecting boards up to 18'X20" and components ranging from 0402 thru 12 mil pitch and also a lot of PLCC/SOJ's I have experience with Orbotech, CR Tech and VI Tech machines. Thanks for any information Royce ************************************************************************* Royce Taylor Process Engineering/Production Suntron Corporation NEO 104 Glenn Street Lawrence, MA 01843 (978)747-2061 voice (978)747-2010 fax [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------