Dear Technetters I read an articel on wet lamination so below is the quatation from the article "Wet lamination of dry film photoresist is not new, but is growing significantly in popularity as cost and technology demands are increasing. Wet lamination helps reduce defects attributed to poor dry film conformation. Key to success for wet lamination has been the reliabilty of the equipment, the wetting station that is attached to the dry film laminator. There are currently about 120 installed wet lamination units in operation which confirms that this process is dependable. the wet lamination process has demonstrated significantly improved yields through a reduction in condutor opens/nicks." I have elaborated on the article "dry Film Photoresist Technology for Profitable Western PCB Production" First of all thank you for that you issued such a half technical and half economical article. We are PCB manufacturer and we apply dry film panel palting and as you mentioned in your article wet lamination will avoid some nicks and opens defects. So How we can apply these wet lamination to our process. What we need to do what do you advice us to do. Can you please provide us with technical assistance for this. We are waiting for your kind interpretation and knowledge So is there anybody who has knowledge about wet lamination process and what kind of equipments we need to convert our process to wet lamination process.? Best Regards Yusuf GÖMEÇ Product Quality Engineer BASKI DEVRE SAN ve TIC LTD STI Ceyhan Sk. No:10 34896 Pendik-Istanbul-Turkey Tel: 00 90 216 3901036 (4 Hat/Line)-173(Extention) 00 90 216 4836560 (4 Hat/Line)-173(Extention) Fax: 00 90 216 3544941 00 90 216 4913269 Gsm: 00 90 533 6579897 00 90 533 7480014 Internet: www.baskidevre.com.tr --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------