hi, don't know if this is applicable, but i've seen a screen mesh used as a shield, in placed of continuous copper, to allow improved adhesion of solder mask and conformal coating without impacting the performance of an electrical plane. phil -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Phil Nutting Sent: Friday, July 29, 2005 1:51 PM To: [log in to unmask] Subject: Re: [TN] Checkerboard pattern on the outer layers... I have also seen a mesh pattern used in place of a large ground plane. It reduces the thermal load during wave soldering. But this would not be a checkerboard pattern. -----Original Message----- From: TechNet [mailto:[log in to unmask]] On Behalf Of Jeffrey Bush Sent: Friday, July 29, 2005 4:01 PM To: [log in to unmask] Subject: Re: [TN] Checkerboard pattern on the outer layers... This is for plating distribution. Outboard thieving is OK (Panel, Pallet, etc), but in-board thief needs to be approved by the designer and should not be added without approval. Many designers allow this either in there PCB spec of master drawing, but an approval is needed as many designs are sensitive to extraneous metal. Jeffrey Bush Director, Quality Assurance and Technical Support VERMONT CIRCUITS INCORPORATED 76 Technology Drive - POB 1890 Brattleboro, Vermont 05302 Voice: 802.257.4571.21 Fax: 802.257.0011 http://www.vtcircuits.com -----Original Message----- From: Stephen Gregory [mailto:[log in to unmask]] Sent: Friday, July 29, 2005 3:47 PM To: [log in to unmask] Subject: [TN] Checkerboard pattern on the outer layers... Hi All! Well, another week is just about to wind-down...YAY! I have a dumb question. When a checkerboard pattern is put on an outer layer of a PCB where there's nothing else, is that called a "copper pour"? It's used to help etching isn't it? One other question about that checkerboard pattern (whatever it's called), a fab house shouldn't just do that without asking, right? Kind regards, -Steve Gregory- Senior Process Engineer LaBarge Incorporated Tulsa, Oklahoma (918) 459-2285 (918) 459-2350 FAX __________________________________________________________________ This message may contain information that is privileged and confidential to LaBarge, Inc. It is for use only by the individual or entity named above. If you are not the intended recipient, you may not copy, use or deliver this message to anyone. In such event, you should destroy the message and kindly notify the sender by reply e-mail. --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------