IPC /WHMA-A-620... Is that the same as IPC-A-620 spec? http://www.ipc.org/TOC/IPC-A-620.pdf Bill Brooks - KG6VVP PCB Design Engineer , C.I.D.+, C.I.I. Tel: (760)597-1500 Ext 3772 Fax: (760)597-1510 e-mail:[log in to unmask] http://www.dtwc.com http://pcbwizards.com -----Original Message----- From: Mumtaz Bora [mailto:[log in to unmask]] Sent: Tuesday, March 15, 2005 3:25 PM To: [log in to unmask] Subject: Re: [TN] Bill, Please refer to IPC /WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness assemblies. At 02:30 PM 3/15/2005 -0500, you wrote: >Hi, > >Does anyone have any information or know where I should look to find >something about how to fasten wires (solid and/or stranded) to relay >sockets? Is there a rule of thumb here? One person I know says that if >the wires are solid it is ok to clamp under screw or metal plate, but if >they are stranded I should use a crimp lug and fasten the lug with the >screw. In other words, crimp lug if stranded, under screw or clamping >plate if solid. I would like to know where to look for information on this. > >Thanks, >Bill Mengers > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 1.8e >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt or (re-start) delivery of Technet send e-mail to >[log in to unmask]: SET Technet NOMAIL or (MAIL) >To receive ONE mailing per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 >for additional information, or contact Keach Sasamori at [log in to unmask] or >847-615-7100 ext.2815 >----------------------------------------------------- Thank-you Mumtaz D/ 8165 - SMT Process Quality Bldg. V244H Voice (858)-882-1967 Fax (858)-882-3511 Page (858)-635-1180 email: [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------