Steve, Another thing you may want to do is pull the manf. spec on your LED. Usually, one of the leads is longer/shorter than the other to help specify the polarity. I have put this information as a detail on the assembly drawing, which helps before the LED is installed in the board. Of course this indication is removed during lead trimming. Hope this helps. dave >Mornin' All! > >There's been a pretty interesting thread going on in the Designers Council >about what is supposed to called pin 1 of a diode...the Anode or the >Cathode. Believe it or not, there's been conflicting answers. So I'd like >to do a little test. > >Look at: > >http://www.stevezeva.homestead.com/files/LEDPin1.jpg > >and tell me if we installed this LED correctly. > >Then look at: > >http://www.stevezeva.homestead.com/files/LEDPolarity.jpg > >and tell me if this this illustration guide I made for our operators is >correct. > >(This ought to be good) > >-Steve Gregory- > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 1.8e >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt or (re-start) delivery of Technet send e-mail to >[log in to unmask]: SET Technet NOMAIL or (MAIL) >To receive ONE mailing per day of all the posts: send e-mail to >[log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 >for additional information, or contact Keach Sasamori at [log in to unmask] or >847-615-7100 ext.2815 >----------------------------------------------------- > >--------------------------------------------------- >Technet Mail List provided as a service by IPC using LISTSERV 1.8e >To unsubscribe, send a message to [log in to unmask] with following text in >the BODY (NOT the subject field): SIGNOFF Technet >To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) >To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest >Search the archives of previous posts at: http://listserv.ipc.org/archives >Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 >----------------------------------------------------- > > > > -- Dave Seymour, CID+ Catapult Communications Inc. 800 Perimeter Park Dr, Suite A Morrisville, NC 27560 Direct: (919)653-4249 Main: (919)653-4180 Fax: (919)653-4297 [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-615-7100 ext.2815 -----------------------------------------------------