Hi Tom, You will get voids in the solderjoints. This is not necessarily a bad thing, but some would argue it is outside the limits of the IPC-A-610. If you read it carefully, you will see that IPC-A-610 gives a lot of freedom with respect to voiding (it suggests some inpection criteria, that's all), so you have to ask the question if everyone involved with the acceptance of the products is a carefull reader. Daan Terstegge Thales Communications Unclassified mail Personal Website: http://www.smtinfo.net >>> [log in to unmask] 06/25/04 05:19pm >>> We're a CM. One of our customers is asking us to build a board assembly that will be using BGAs with VIAs in pads. They are in the design stages at this point, and we have some concerns with having a Via in the middle of a BGA pad. Anyone have suggestions and/or experience with this?? Thanks Tom Parkinson - Quality System Manager - CIT WinTronics, Inc. Ph: 724-981-5770 Ext. 235 Fax: 724-981-1772 --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------