We have been asked by a customer if we can route a .034 slot in a 8 layer rigid flex with a tolerance of +/-.001 and a positional tolerance of +/-.003 to all other routed tolerances on the rigid board section. The radius must also be .017 +/-.0005. Any thoughts. Thanks. Steve Kelly PFC Flexible Circuits Limited Ph: (416) 750-8433 Fax: (416) 750-0016 Cell: (416) 577-8433 E-Mail: [log in to unmask] --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------