I was thinking more of as the person went to sit in the chair, the chair would roll away from them and they would end up sitting rather abruptly on the floor. >>> [log in to unmask] 01/19/04 03:59PM >>> The footprint of the modern chair rollers is larger than the seat. It keeps them from tipping over, specially towards the back of the person sitting on it. There were some old chair designs that would tip over and people got hurt. Even chairs without rollers did that. With good designed chairs there would not be any problem. Regards, Ramon . > -----Original Message----- > From: Blair K. Hogg [SMTP:[log in to unmask]] > Sent: Monday, January 19, 2004 3:40 PM > To: [log in to unmask] > Subject: Re: [TN] Production Chairs tearing up the Epoxy floor. > > Perhaps safety issues? Don't want the chair to roll out from under > someone and cause an accident? > > >>> [log in to unmask] 01/19/04 03:31PM >>> > Jim West > > What is your thinking in prohibiting chair with rollers? > > Dave Fish > ----- Original Message ----- > From: "West, Jim" <[log in to unmask]> > To: <[log in to unmask]> > Sent: Monday, January 19, 2004 10:26 AM > Subject: [TN] Production Chairs tearing up the Epoxy floor. > > > > Hi, > > > > Looking for some ideas on how to prevent deep scratches to our Epoxy > ESD > > safe floor? We do not allow chairs with rollers, but I'm thinking > this > may > > be the only way to prevent the scratches. This mostly occurs with the > > associate sitting on their chair then pulling themselves towards their > work > > surface. Any suggestions for a way to keep chairs without rollers > from > > digging into the painted floor? > > > > > > > > Thanks, > > Jim > > > > --------------------------------------------------- > > Technet Mail List provided as a service by IPC using LISTSERV 1.8e > > To unsubscribe, send a message to [log in to unmask] with following text > in > > the BODY (NOT the subject field): SIGNOFF Technet > > To temporarily halt or (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) > > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > > Search the archives of previous posts at: > http://listserv.ipc.org/archives > > Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 > for additional information, or contact Keach Sasamori at [log in to unmask] > or > 847-509-9700 ext.5315 > > ----------------------------------------------------- > > > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] with following text > in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to > [log in to unmask]: SET Technet NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: send e-mail to > [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: > http://listserv.ipc.org/archives > Please visit IPC web site > http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional > information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 > ext.5315 > ----------------------------------------------------- > > > ********************************************************************** > This email and any files transmitted with it are confidential and > intended solely for the use of the individual or entity to whom they > are addressed. If you have received this email in error please notify > the system manager. > > This footnote also confirms that this email message has been swept > for the presence of computer viruses. > > www.hubbell.com - Hubbell Incorporated > ********************************************************************** > > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)> > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 ----------------------------------------------------- ********************************************************************** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept for the presence of computer viruses. www.hubbell.com - Hubbell Incorporated ********************************************************************** --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------