Jean-Francois: Probably your concern is what if the board bangs on the walls of the metal box and self destructs. If it is for transporting to another location and properly packaged, it would be better protected than if in a cardboard box. If the metal box is where is going to be mounted and it is properly secured, that is the way most boards are. Either way there should not be a problem. Regards, Ramon > -----Original Message----- > From: Bissonnette, Jean-Francois [SMTP:[log in to unmask]] > Sent: Friday, November 14, 2003 4:02 PM > To: [log in to unmask] > Subject: [TN] ESD sensitivity on finished assemblies > > What is the risk of damaging parts on an PCB when it enclosed in a metal box > > considering that there is a connector (no cap on it) that is connected to > the PCB > inside the PCB. > > Jean-François Bissonnette > Vérificateur, Contrôle de la Qualité > Électronique > Produits et Procédés > Vapor Rail Inc. > 10655 Henri-Bourassa O. > St-Laurent, Qc > H4S 1A1 > > (514) 335-4200 x2021 > (514) 335-4231 fax > > > > ***** CONFIDENTIALITY NOTE ***** > The content contained in this e-mail transmission is legally privileged and confidential information intended only for the use of the individual or entity named herein. If the reader of this transmission is not the intended recipient, you are hereby notified that any dissemination, distribution, or copying of this transmission is strictly prohibited. > > --------------------------------------------------- > Technet Mail List provided as a service by IPC using LISTSERV 1.8e > To unsubscribe, send a message to [log in to unmask] with following text in > the BODY (NOT the subject field): SIGNOFF Technet > To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) > To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest > Search the archives of previous posts at: http://listserv.ipc.org/archives > Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 > ----------------------------------------------------- --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------