In a message dated 10/29/2003 9:44:53 AM US Eastern Standard Time, [log in to unmask] writes: What type of measuring device do you use to check proper lead length? We need something to measure .030 on production line. The best solution I have seen is a template with a cutout area for each individual lead, or groups of leads if they are very close together. Make the template thickness .030" in your example, then slide a straightedge over the entire board. It is quick and simple to find any lead that is too long. I have seen these templates made by Safechek and by FineLine Stencil. Jon Moore --------------------------------------------------- Technet Mail List provided as a service by IPC using LISTSERV 1.8e To unsubscribe, send a message to [log in to unmask] with following text in the BODY (NOT the subject field): SIGNOFF Technet To temporarily halt or (re-start) delivery of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL) To receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]: SET Technet Digest Search the archives of previous posts at: http://listserv.ipc.org/archives Please visit IPC web site http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information, or contact Keach Sasamori at [log in to unmask] or 847-509-9700 ext.5315 -----------------------------------------------------