Yes,
there is. IPC-A-600 2.9.3
I am
sure this requirement is also reflected in IPC-6012A
Solder Resist on other conductive patterns (SMT land patterns
included)
<
1.25 mm pitch shall not encroach both sides of the land or exceed 0.05
mm
>
1.25 mm pitch shall not encroach both sides of the land or exceed 0.01 mm
Hi,
Is there a IPC
standard for how much, if any silkscreen can overlap a solder pad?
What process is recommended for cleaning a solder pad with silkscreen
overtop of it? Examples I have are silkscreen on 0805 pads
halfway through it, and some with silkscreen just barely
touching.
Thanks,
Jim
---------------------------------------------------
Technet Mail
List provided as a free service by IPC using LISTSERV 1.8e
To unsubscribe,
send a message to [log in to unmask] with following text in the BODY (NOT the
subject field): SIGNOFF Technet
To temporarily halt or (re-start) delivery
of Technet send e-mail to [log in to unmask]: SET Technet NOMAIL or (MAIL)
To
receive ONE mailing per day of all the posts: send e-mail to [log in to unmask]:
SET Technet Digest
Search the archives of previous posts at:
http://listserv.ipc.org/archives
Please visit IPC web site
http://www.ipc.org/contentpage.asp?Pageid=4.3.16 for additional information,
or contact Keach Sasamori at [log in to unmask] or 847-509-9700
ext.5315
-----------------------------------------------------